- PNEUMATIC CHILLER
- SH-SERIES
- Pneumatic Chiller
- It can be used for various applications such as cutting and welding that require cooling.
The Usage of Pneumatic Chiller 
- It can be used for various applications such as cutting and welding that require cooling.
- Apply to various fields in need of cooling.
- Effective in local cooling.
- In case that cooling is required in dry process and injection in machine tool.
- In case that the cooling is performed or more rapid cooling is required through normal compressed air
Features of Pneumatic Chiller
- Unlike other general cooling air conditioners, this is a device that cools/supplies compressed air-through a compressor.
- It provides improved cooling performance (low temperature ↓, flow rate ↑) by overcoming the limitations of existing air coolers (vortex tubes).
- It can be used for various applications such as cutting and welding that require cooling.
- Because the compressed air is cooled, a corresponding flow rate with pressure can be continuously -supplied to the local area.
- In addition, it can be applied in various applications where cooled air pressure is required.
Application Example
Video
SH-SERISE Specification
| MODEL | SH-003 | SH-002 | SH-010 |
|---|---|---|---|
| Output capacity | 1/3 HP | 1/2 HP | 1 HP |
| Voltage | Will be released | 220V(4A)/60Hz(1PH) | Will be released |
| Heat of conversion | 595 kcal | ||
| Max. cooling temperature | -20℃ | ||
| Max. flow rate | 450 L/min | ||
| Purge flow rate | 112 L/min | ||
| Dimension | 500*700*700H (W*L*H / unit : mm) |
||
| Weight | 약 70 kgf |
※ 사용주변온도 : 0~50℃ 이내, 입력압력 : 7kgf/㎠ 기준
※ SH-003, SH-010 등 기타사양은 개발완료시 추후 공개예정
※ 위의 사양은 본사의 시험조건하에서 측정된 것으로서 실제 조건에 따라 달라질 수 있습니다.
※ 본 사양 및 치수는 참고용 자료이며, 본사의 제품개발과정에 따라 사전예고 없이 변경될 수 있습니다.
SH-SERIES DIMENSION
| MODEL | A | B | C | Weight |
|---|---|---|---|---|
| SH-003 | Will be released | |||
| SH-002 | 700mm | 500mm | 700mm | 70kgf |
| SH-010 | Will be released | |||
Outside View
Precautions of Air Cooler
- There is a risk of electric shock to the input/output terminals of parts related to electricity.
- Recommended air pressure: 3~6kg/㎠
- Recommended air temperature: 0~60℃
- Recommended operating time: 8 hour/1 day (Warranty period : 12 months from date of purchase)
- If air pipes or the drainage discharge unit are to be removed, compressed air should be completely released beforehand
- Do not modify, disassemble or repair the product. (* Product warranty cannot be guaranteed due to the reason)
- Do not use fluids other than compressed air
- It is recommended to use under the following temperature and pressure.
Recommended oper. temp.:0~50 ℃
Recommended oper. pressure:4~10 bar - Please avoid to use in humid or dusty locations
- Do not apply excessive shock or pile heavy objects on the product.
- SH-SERIES are designed to keep noise pollution at a minimum.
SH-SERIES’s average noise : over 80dB - Be careful not to manipulate or touch anyone other than the person in charge who is familiar with the above.
