- AIR HAMMER
- DST-SERIES(Old), DSTN-SERIES(New)
- AIR HAMMER
- Very strong blow is realized with low-pressure compressed air (2-5 BAR)
Worksites that require hammering, crushing, and strong impact
Air Hammer (DST, DSTN-Series) Product Applications
- Tasks that require strong hammering (* Local blow)
- Bottlenecks that are difficult to solve with other knockers or vibrators etc. (* High viscosity sludge, etc.)
- Application of automation equipment that requires strong striking force
Feature of product
- More stronger striking power with patented new technology
- Installation and application of the product is possible simply
- It can be applied to various places of use by strong performance (* Expect sufficient effect only by using within 2-5 BAR)
Precautions when using an air hammer
- When using, be sure to use it in a state where the safety of workers and personnel is secured.
(* Be absolutely careful about safety accidents such as getting caught in your hands, hitting body parts, etc.) - Be sure to use it within the recommended pressure, and do not use it at a pressure higher than that.
(* DST-60: within 5Bar, DST-100: within 4BAR is recommended.) - It is forbidden to use it towards personnel and the body, and it is strictly prohibited to apply it to weapons that harm the human body.
- Our company does not guarantee damage or failure due to arbitrary modification of the product.
(* Arbitrary exhaust flow control, striking weight modification, etc. / Warranty period : 1 year) - When installing the product, it is recommended to use a 3-way(port) solenoid valve, and use it within the maximum number of strokes per minute.
- Since the product is a heavy object, please consider the proper measures when installing (* Fall prevention with I-bolts, etc.)
- If abnormal operation is confirmed, stop using it immediately and contact us for measures after checking the product.
- The strong striking force may affect the joint of the product.
To prevent this, please check the tightening condition before, during, and after work, and for a certain period of time.
DST 3way sol valve app
솔레노이드 밸브 설치 안내
DST-Series
DSTN-Series
DST-SERIES Specification
MODEL | Max. Impulse (kg*m/s) | Max. Stroke/min (SPM) | Max. Air Pressure (kgf/㎠) | Max. Air consupmtion (LPM) | Stroke (mm) | Weight (kgf) |
---|---|---|---|---|---|---|
DST-60 | 13.3 (5 kgf/㎠) | 30 | 4 kgf/㎠ | 45 (5 kgf/㎠) | 45 | 13 |
DST-100 | 154.5 (4 kgf/㎠) | 20 | 3 kgf/㎠ | 74 (4 kgf/㎠) | 52 | 30 |
※ These measurements were measured under our test conditions. And they depend on various conditions.
※ Do not install or operate the product before checking the cautions.
DSTN-SERIES Specification
MODEL | Max. Impulse (kg*m/s) | Max. Stroke/min (SPM) | Max. Air Pressure (kgf/㎠) | Max. Air consupmtion (LPM) | Stroke (mm) | Weight (kgf) |
---|---|---|---|---|---|---|
DSTN-30 | 17.6 (5 kgf/㎠) | 52 | 4 kgf/㎠ | 16 (5 kgf/㎠) | 27 | 2 |
DSTN-60 | 125.47 (5 kgf/㎠) | 56 | 4 kgf/㎠ | 67 (5 kgf/㎠) | 45.5 | 8.3 |
DSTN-100 | 842.16 (5 kgf/㎠) | 39 | 3 kgf/㎠ | 132 (5 kgf/㎠) | 51.5 | 22.5 |
※ These measurements were measured under our test conditions. And they depend on various conditions.
※ Do not install or operate the product before checking the cautions.
Outside View
※ These specifications and dimensions are for reference only.
And these are subject to change without prior notice depending on the product development process of our company.
※ If processing of the assembly is required, be sure to check the actual size of the product for the relevant.
DSTN-Seires
MODEL | A | B | C | D | E | F | G | H |
---|---|---|---|---|---|---|---|---|
DSTN-60 | 304 | 45.5 | 349.5 | 27 | 110 | 75 | PT3/8 | 6-M8 DP16 P.C.D 65 |
DSTN-100 | 376 | 51.5 | 427.5 | 40 | 159 | 117 | PT1/2 | 6-M12 DP24 P.C.D 88 |
※ These specifications and dimensions are for reference only.
And these are subject to change without prior notice depending on the product development process of our company.
※ If processing of the assembly is required, be sure to check the actual size of the product for the relevant.
Precautions when using an air hammer
- When using, be sure to use it in a state where the safety of workers and personnel is secured.
(* Be absolutely careful about safety accidents such as getting caught in your hands, hitting body parts, etc.) - Recommended air pressure: 1~4kg/㎠
- Recommended air temperature: 0~60℃
- Recommended operating time: 8 hour/1 day (Warranty period : 12 months from date of purchase)
- Be sure to use it within the recommended pressure, and do not use it at a pressure higher than that.
(* DST-60: within 5Bar, DST-100: within 4BAR is recommended.) - It is forbidden to use it towards personnel and the body, and it is strictly prohibited to apply it to weapons that harm the human body.
- Our company does not guarantee damage or failure due to arbitrary modification of the product.
(* Arbitrary exhaust flow control, striking weight modification, etc. / Warranty period : 1 year) - When installing the product, it is recommended to use a 3-way(port) solenoid valve, and use it within the maximum number of strokes per minute.
- Since the product is a heavy object, please consider the proper measures when installing (* Fall prevention with I-bolts, etc.)
- If abnormal operation is confirmed, stop using it immediately and contact us for measures after checking the product.
- The strong striking force may affect the joint of the product.
To prevent this, please check the tightening condition before, during, and after work, and for a certain period of time. - When applying a strike, it can be applied to a fixed, flat target object. (Example : Impossible to hit the rotating body)